Digger | How To Digg Holes with the Help of Post Hole Digger?

When it comes to digging fence post holes for a new field, post hole digger agricultural machinery are the way to go. Whether you're using a handheld driller or a tractor-mounted type digger, post hole digger significantly speed up and clarify the process related to manual post hole diggers.

It's fascinating to simply fire up the digger and head out for a day of drilling, but a small caution and advance training can go a long way toward securing you drill the right openings for the job. Here are some tips that will help you practice a specific line of perfect holes every time. 

Remove Sod First

Pending how fast post hole digger can drill through dirt, it might amaze you to know they can drown when tasked with drilling through a thick layer of sod. Particularly if provisions are wet, the grass and vegetation may clog the end of the drill, sticking in place and making it difficult for the blades to get a grip on the soil below. Save yourself some time by using a spade to remove sod before you drill.

Line It Up

You want your columns to be set in a straight, careful line particularly if you're making a wooden fence. A simple way to do this is to drive short stakes from one point on the front line to another and stretch a long rope between them. This provides you a simple, frank way to measure and mark the position of each post.

But your attention shouldn't stop here. Once you've correctly marked the location of each post, create the tip of the digger bites into the soil at exactly the point you've marked. It may not show as a big deal if the drill slips and drills a few too far to the left or right, but if your posts are close together, you'll notice the resulting holes weaving in and out of line. Adjust the auger if required to assure evenly distributed support across the entire drop line.

Point Straight Down

Don't let the post hole digger enter the spot at an angle. At best, you'll wind up with a hole that's hard to backfill, and at worst you'll face the difficulty of a bent fence post. This is a bigger interest if you're using a handheld digger, but even tractor-mounted post hole digger has some play. It can be difficult to tell if the digger is enrolling the ground straight when you're lying on the tractor, so obtain a helper to attain a safe distance to the side and see your auger's position. Have them give you signals if the auger starts to angle.

Drill Wide Holes

If you're able to determine the diameter of your post hole digger, go ahead and dig a hole significantly wider than your columns. A hole three rates wider than the column really isn't too serious. If you drill wide, large holes, you'll have a more relaxed time thoroughly backfilling to secure posts in place. And if the hole is too tight, it can be difficult to press the backfill, resulting in insecure and shaky posts.

Working Video of Post Hole Digger

Good luck with your next fencing project!